Operation - Sauter Vario Bench Bedienungsanleitung

Available Extra or with Vario-Bench Starter Set (SET-VB-STARTER)
Bench Pins (SA-VB-BDOG-S or SA-VB-BDOG-L)
Depending on the material thickness of the workpiece, short or
long bench pins are required. We recommend two short and two
long bench pins (delivery includes fixing screws).
Technical Data:
- Size: 25 x 67 mm (Short), 25 x 118 mm (Long)
- Material: Magnetic Stainless Steel

Operation

1) Functionality
The Vario-Bench system allows commercially available guide rails to be positioned at
defined angles in relation to a workpiece and then processed with hand tools guided on
the guide rail.
In order to set the desired processing angle, the bench pins are inserted into the
correspondingly labeled holes of the Vario-Bench worktop and then both the workpiece
and the guide rail are placed against them. The guide rail and the workpiece can be
rotated against each other allowing adjustments in 1° increments.
In order to achieve maximum accuracy, the bench pins and the holes in the Vario-Bench
worktop are manufactured with the highest precision and are optimally matched to each
other in terms of diameter. In standard use the bench pins are inserted into the bench
with the end with a hole facing up. However, as the Vario-Bench worktop is made of
MDF, in humid conditions it can slightly swell. In this case, if the bench pins can no
longer be easily mounted in the Vario-Bench worktop, simply turn them over, they have
been designed with a slightly smaller diameter on one side, so as to maintain the
perfect fit and maximum accuracy.