Pearl POI PILOT 6000 Bedienungsanleitung Seite 45

 Delete data
If the "+" and "–" buttons are pressed simultaneously for
more than 3 seconds, all POI data (incl. the speed traps)
will be deleted.
NOTE:
The POI Pilot is supplied without data. You as
the user decide yourself during installation via the
POIbase software which POI types and categories
should be installed.
In a stationary motor vehicle, the POI Pilot 6000 displays
the time (give or take an hour according to summer/winter
time). During the journey, the display changes and shows the
current GPS-based speed.
During a POI warning, the display changes from the current
speed to the distance in metres until the speed trap/POI is
reached.
If a warning pertains to a stationary speed trap, the word
"Fixed" also appears on the display. If a warning pertains to
a mobile speed trap, the word "Mobile" also appears on the
display.
After installation, the POI Pilot warns by default about, for
example, stationary speed traps twice, acoustically and
visually, before the danger spot is reached. The first time for
25 secs and 10 secs. The possible mobile danger spots are
only indicated visually for 20 secs and 10 secs. These settings
are individually adjustable in expert mode.
 Requesting battery status
The battery status is announced via voice response and
appears on the display by pressing the keys „+" and „-"
simultaneously and briefly.
 Charging the battery
The internal battery will be charged regardless of whether
the device is turned on or off. Charging time is 2 – 3 hours
for an empty battery.
EXPERT MODE – CAUTION, ONLY FOR EXPERIENCED
USERS!
The setting options are extensive and allow individual
adjustment to your needs; however, they present a challenge
for the first-time user.
Should your device fail to show the familiar or desired
warning behaviour after modifying the settings, it would be
best to reset to factory settings (press all three buttons -/M/+
for at least 3 seconds).
Alongside the warning settings for the four POI types 1. – 4.,
there are system settings (5.), which affect all types.
Main menu
The main menu is reached by means of the M button. By
means of the +/- buttons, you can jump from one menu item
to the next. To select a menu item, press the M button again.
45