After Operation; Filter Replacement And Emptying The Dust Canister; Emptying The Dust Canister - Fakir Freelander BL 6058 Benutzerhandbuch

EN

After Operation

WARNING!
Immediately after completing your vacuuming, perform the steps below. Never leave your
appliance unattended.
1
1-Turn off your appliance using the on/off switch on the body.
2-Then unplug the appliance.
3-When you press the cord recoiling button on the body, the cord will be automatically recoiled.
Hold the plug with your hand until the cord is completely recoiled.
NOTE!
Use only the original filters provided by Fakir. Only then can you provide the perfect filtering.

Filter Replacement and Emptying the Dust Canister

If the dust canister fills and/or the filters are blocked the vacuum power of your device will
drop. In this case, empty the dust container and change the filters or remove the factor that
blocks the suction power. (See: Page 40 Troubleshooting)

Emptying the dust canister

Always operate your vacuum cleaner with the dust canister installed. Dust canister shall be
emptied immediately if suction power is reduces during vacuum cleaning.
3
34