Fakir Freelander BL 6058 Benutzerhandbuch Seite 40

EN
PROBLEM POSSIBLE CAUSE
It is not plugged in or the machine is
not started.
When the
machine is not There is no current through the
working socket.
The cable is damaged.
Dust container is full or blocked.
The selected brush is not suitable
for the surface.
When the
appliance is not
The filter is dirty.
vacuuming the
dust
Hose, suction tube or nozzle
is clogged.
If the machine
The vacuumed objects may be
make a lot
clogging
of noise during
the airway.
operation,
NOTE!
Before you call Customer Service, check whether you can correct the problem/ fault
yourself.
For this purpose, please see the "TROUBLESHOOTING" section. If you can not resolve
the problem/error, please call Customer Service. Before calling please make ready the
model name and product serial number. You can find this information on the TYPE LABEL
of your product. Help Line: (+90 212) 444 0 241
SOLUTION
Plug in the power plug and
switch on the appliance
.
Connect your vacuum cleaner
to another socket
that you are sure that there is
current in the socket.
Replace the cord from
Fakir Authorized Service.
Empty/clean the dust canister
.
Replace your brush with one
suitable for the
surface.
Clear the relevant filter.
Make sure the Cassette Filter,
HEPA, felt filter and sponge filter
are clean.
Remove the clogging. If
necessary,
you can use a long piece of
wood
for this.
Remove the clogging by
removing the objects. If
necessary,
you can use a long piece of
wood
for this.
40