Fakir Freelander BL 6058 Benutzerhandbuch Seite 33

CAUTION!
If you use the vacuum cleaner without floor nozzle, there is a greater risk of accident due
to vacuum cleaning the items indoor.
Operation
1. As shown in the figure, insert the vacuum hose into the vacuum inlet.
2.Press the handle into the telescopic tube.
3. Place the floor nozzle to the other end of the telescopic tube.
4. Adjust the length of the vacuum pipe, to do this push the button on the pipe forward. Then
pull the vacuum tube up to the desired length. Release the key on the tube for locking and
bring the vacuum tube in a free position.
5. You can pull the cord by holding the plug until the red warning line is seen.
6. Turn on the vacuum cleaner by pressing the on/off switch.
8. For vacuuming, pull the vacuum cleaner provided that it is behind you
Your appliance has an electronic speed control. You can decrease or increase the suction
power as you want. Bring the speed adjustment key to moderate/mid level for carpet surfaces.
It is recommended to adjust the key to maximum level for parquets and wet surfaces.
1
4
WARNING!
If you are going to leave the work area, switch off the machine.
3
5
33
EN