Yamaha RX-V457 Bedienungsanleitung Seite 25

7
Press d to display the SPEAKERS
parameter.
ENTER
PRESET/CH
8
Press j / i to select the number of speakers
you connected.
SPEAKERS .. 6spk
Choices Display
L L L L C C R R
2spk
SL SB SR SL SB SR
L L C R
3spk
SL SB SR
L L C R
4spk
SL SB SR
L L C R
5spk
SL SB SB SR
L L C R
6spk
SL SB SR
9
Press d to display SET/CANCEL.
ENTER
PRESET/CH
10
Press j / i to select the desired setting.
>SET CANCEL
SET
To apply the settings you chose in steps
4 through 8.
CANCEL
To cancel the setup without making any
changes.
A/B/C/D/E
Speakers
Front L/R
Front L/R, Center
Front L/R, Surround L/R
Front L/R, Center, Surround L/R
Front L/R, Center, Surround L/R,
Surround back
A/B/C/D/E
11
Press ENTER to confirm your selection.
ENTER
PRESET/CH
If you selected SET, you hear a test tone from each
speaker in turn. "CHECK:TestTone" appears in the
front panel display for a few seconds, then "CHECK:
OK?".
CHECK:TestTone
CHECK OK? YES
12
Press j / i to select the desired setting.
CHECK OK? YES
YES
To complete the setup process if the test tone
levels from each speaker were satisfactory.
NO
To proceed to the SPEAKER LEVEL speaker
level adjustment menu to balance the level of
each speaker.
13
Press ENTER to confirm your selection.
ENTER
PRESET/CH
If you selected NO in step 12, the front speaker level
adjustment display appears in the front panel display.
BASIC SETUP
A/B/C/D/E
A/B/C/D/E
23