Safety Information - FLORABEST IAN 353210 2007 Aufbauanleitung

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety
information carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Package contents (Fig. A)
1 x lounge set (1–7)
2 x seat (1), (2)
2 x stool (3)
1 x table (4)
1 x glass pane (5)
4 x seat squab (6)
4 x cushion (7)
4 x fastening clamp (8)
1 x assembly instructions
1 x quick start guide
Technical data
Seat dimensions:
approx. 93 x 73 x 64cm (W x D x H)
Stool dimensions:
approx. 84 x 64 x 32cm (W x D x H)
Table dimensions:
approx. 73 x 40 x 50cm (W x D x H)
Maximum load per seat: 110kg
110
Maximum load, table: 50kg
Date of manufacture (month/year):
12/2020
Intended use
The product is designed for residential use, e.g.
on a (rooftop) terrace or in the garden. The
product is not intended for commercial use.

Safety information

Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of suffo-
cation.
Risk of injury!
• Ensure the product is properly stabilised
before using it!
• Place the product on a level, firm, scratch-
proof and sufficiently sturdy surface.
• The product may only be used under adult
supervision and must not be used as a toy.
• Mind your fingers in particular when attaching
the fastening clamps. There is a risk of injury
from crushing.
• Check the product for damage or wear before
each use.
• Never stand on the product. The product can
tip over.
• Never sit on the backrest. The product can tip
over.
• Do not use the product near open fire.
Preventing damage to the
product!
• Secure the product during extreme weather
conditions, e.g. strong wind. Store the product
in a sheltered area.
Setting up the product
There are various ways to arrange the product,
as shown in Figures C and D.
Important: if you wish to arrange the product
as a set, use the fastening clamps (8) to prevent
the individual parts of the seats and stools from
moving apart (Fig. B).
Note: carefully place the glass pane (5) on
the spacers of the table (4) to prevent the glass
pane from slipping.
Stacking the product
Proceed as follows to compactly store the prod-
uct, including seat squabs and cushions, when
not in use:
1. Place two seat squabs (6) on a dry and clean
surface (Fig. E).
Note: it is recommended that you cover the
floor with a suitable tarpaulin to keep the prod-
uct from getting dirty.
2. Place one seat (1) over the seat squabs
(Fig. E).
3. Turn one stool (3) over and place one cush-
ion (7) into the opening (Fig. F).
4. Place the stool with the cushion on the seat
(Fig. F).
5. Turn the table (4) on its side, insert two cush-
ions into it and place it on the cushion in the
stool (Fig. G).
Note: first pick up the glass pane (5), stow the
table and place the glass pane back on top of
the table.
6. Place one cushion on the side wall of the
table and place a stool on top of the cushion
(Fig. G).
7. Turn the second seat (2) over and place
the seating surface of it on top of the stool
(Fig. H).
8. Stow two seat squabs in the hollow space of
the seat that was turned over (Fig. H).
Note: cover the product with a suitable tarpau-
lin to keep it from getting dirty.
Storage, cleaning
When not in use, always store the product clean
and dry at room temperature.
Only clean the product with a damp cloth and
wipe dry afterwards.
IMPORTANT! Never clean the product with
harsh cleaning agents.
Cover: wash by hand only
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the pack-
aging materials out of the reach of children.
Dispose of the products and the
packaging in an environmentally friendly
manner.
The recycling code is used to identify
various materials for recycling.
The code consists of the recycling symbol
– which is meant to reflect the recycling cycle –
and a number which identifies the material.
Notes on the guarantee and
service handling
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
Any repairs under the warranty, statutory guar-
antees or through goodwill do not extend the
warranty period. This also applies to replaced
and repaired parts. Repairs after the warranty
are subject to a charge.
IAN: 353210_2007
Service Great Britain
Tel.: 0800 404 7657
E-Mail: deltasport@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: deltasport@lidl.ie
GB/IE 9