23 CDT-RX
24 CDT-TX
25 CD-RT
26 RESET
8. External speaker
It is advisable to connect an external speaker depending on
the ambient noise. Typical, commercial radio speakers with
4-8 ohms impedance and a minimum power of 2-4 W can be
used.
Up to a 3 metre long cable can be used. For speakers that will
be used in a vehicle, make sure that a two-pin 3.5 mm jack is
used and that none of the speaker connections are attached to
the vehicle frame.
9. Spezifications
Transmission frequencies
Input voltage
Transmission power
Operation temperature
Current consumption
Antenna connector
Dimensions
Weight
36
OF Set CTCSS/DCS tone for receive mode
Set CTCSS/DCS Tone for transmission
OF
mode
Set CTCSS/DCS tone for transmit and
OF
receive mode simultaneously
Reset to factory settings
dE: 26,565 - 27,405 MHz
In: 26,965 - 27,275 MHz
EU: 26,965 - 27,405 MHz
CE: 26,965 - 27,405 MHz
U: 27,60125 - 27,99125 MHz
PL: 26,960 - 27,400 MHz
I2: 26,855 - 27,265 MHz
12/24 V
4 Watt AM/FM
-20°C to +50°C
3 A max.
UHF, SO-239
124x101x36mm
428g