Repeater/Relay Function - Albrecht AE 6290 Bedienungsanleitung

6. Repeater/Relay function

With the new repeater function of the AE 6290 you can achieve
almost twice the range compared to normal CB radio operation.
The radio transmits on one channel (TX1) and receives
radio messages on a second channel (RX2). The AE 6290
automatically switches back and forth between the two channels.
For example, set channel 40 as the repeater receiving channel
and channel 41 as the repeater transmitter channel. The radio
displays channel 40 in receiving mode and waits for incoming
radio transmissions. If you now press the PTT transmit button,
the radio automatically switches to transmit channel 41. When
you release the PTT button again, the radio returns to receive
channel 40.
To activate the function, go to the main menu (MENU) and select
ON under RPT.SET.
Now select the item RPT.RX in the main menu to set the receiving
channel (transmitter channel of the relay) in repeater mode.
Under the menu item RPT.TX you can set the transmiting
channel of the AE6290 (receiving channel of the relay).
Some relays use two different CTCSS/DCS tones instead to
separate the transmit and receive directions. Use the menu
items CDT-RX and CDT-TX for this.
34