Cleaning; Maintenance Intervals; Maintenance Interval Table - Grizzly Tools EC 1800-2 Originalbetriebsanleitung

Cleaning

• Clean the machine thoroughly after
every use. In this way, you extend
the life of the machine and avoid ac-
cidents.
• Keep the gripping handles free of
petrol, oil or grease. Clean the grip-
ping handles, where appropriate, with
a moist cloth soaked in soap. Use no
solvents or petrol for cleaning!
• Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.

Maintenance intervals

Regularly carry out the maintenance operations listed in the following table. The life of
the saw is extended by regular maintenance of your chainsaw. Furthermore, you get
optimum cutting performance and avoid accidents.

Maintenance Interval Table

Machine part
Components of the chain
brake
Sprocket chain wheel (
Saw chain ( 5)
Saw chain ( 5)
Guide bar ( 4)
Guide bar ( 4)
Oil automatic system
Action
Check, replace if required
24) Check, replace if required
Check oil, regrind or re-
place if required
Clean and oil
Check, clean and oil
turn around
check and, where appropriate,
clean oil outflow duct
• When cleaning, also remove the chain
wheel cover (
can be cleaned as well.
• Clean the chain bar (Guide) (
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.
• Clean the oil passages of the chain
bar
( 27), in order to guarantee a trou-
ble-free, automatic oiling of the saw
chain during operation.
every
8) so that this area
Be- After 10
fore hours of
opera-
use tion






GB
4).
After
every
use


97