Technical Data; Notes On Safety - Grizzly Tools EC 1800-2 Originalbetriebsanleitung

GB
12 Mains cable
13 On/off switch
14 Safety lock
15 Electric motor
16 Front handle
17 Bumper
18 Chain catcher (not visible)
19 Saw bar protection sheath
20 Oil bottle
21 Oil level indicator
22 Minimum mark "MIN"
on the oil level indicator
23 Bar bolt
24 Sprocket
25 Tab
26 Tensioning screw
27 Oil passages

Technical Data

Electric Chainsaw ...................EC 1800-2
Rated input voltage U ...220-240 V~, 50 Hz
Input power P ............................... 1800 W
Safety class .........................................
Protection category............................ IPX0
Chain speed v ............................... 14 m/s
0
Weight ................................approx. 4.5 kg
Oiltank ...............................approx. 280 ml
Chain ............................... Oregon 91P053
Chain bar ................ Oregon 140SDEA041
Chain link separation ......... 3/8" (9.53 mm)
Chain width ..................................1.27 mm
Teeth of the sprocket chain wheel ...........6
Length of the chain bar .................420 mm
Sawing length ...............................350 mm
Acoustic pressure level
(L ) .................... 91.5 dB (A); K
pA
Sound power level (L
measured .... 103.4 dB(A); K
guaranteed .............................106 dB(A)
Vibration (a ) .......... 5.79 m/s
h
82
= 3 dB
pA
)
WA
= 2.55 dB
WA
; K= 1.5 m/s
2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).

Notes on safety

II
This section deals with the basic safety
regulations while working with the electric
chainsaw.
An electric chainsaw is a danger-
ous device, which can cause
serious or even fatal injuries with
incorrect or careless use. Thus,
for your own safety and the safety
of others, you should always take
note of the instructions on safety
and, in case of difficulties, consult
a specialist for advice.
2