Grizzly Tools EC 1800-2 Originalbetriebsanleitung Seite 86

GB
stances, may impair the functionality
of active or passive medical implants.
To reduce the risk of serious or lethal
injuries, we recommend that persons
with medical implants consult their
doctor and the manufacturer of their
medical implant before operating the
machine.
i) Change your working position regu-
larly. Long use of the equipment can
result in vibration-related circulatory
disorders in the hands. However, the
length of use can be extended by us-
ing suitable gloves or taking regular
breaks. Note that a personal tendency
for poor circulation, low outdoor tem-
peratures, or high gripping forces dur-
ing work will reduce the length of use.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use
the correct power tool for your ap-
plication. The correct power tool will
do the job better and safer at the rate
for which it was
Do not use the power tool if the
b)
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the pow-
er source and/or the battery pack
from the power tool before making
any adjustments, changing acces-
sories, or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool ac-
cidentaIly.
Store idle power tools out of the
d)
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool. Power tools are
86
designed.
dangerous in the hands of untrained
users.
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean.
f)
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the power tool for operations differ-
ent from those intended could result in
a hazardous situation.
h) If the power cable for this equipment
is damaged, it must be replaced by
the manufacturer, a customer service
agent of the same or a similarly quali-
fied person in order to prevent hazards.
5) SERVICE
Have your power tool serviced by
a)
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
6) CHAIN SAW SAFETY WARNINGS:
a) Keep all parts of the body away
from the saw chain when the chain
saw is operating. Before you start
the chain saw, make sure the saw
chain is not contacting anything. A
moment of inattention white operating