Marking And Identification; Mounting Of The Hose - Faicom BG Gebrauchsanweisung

6 - MARKING AND IDENTIFICATION

Model
Features
Year of
construction
7 - MOUNTING OF THE HOSE (Models without hose)
The hose reels without hose are supplied with the unloaded spring.
Use a hose with dimension and pressure characteristics suitable for use according to the
hose reel model.
Normally, the hoses must be connected Female Straight Gas, if using a hose 1/2" Acqua
400bar (EN587 2SC) it is recommended crimping F.90° 1/2"G.
Centered
(C)
Swivel Joint
see tables pag. 36-37
7.1
7.1) Fix the hose reel to the bench.
Put the hose between the guide rollers, connect it to the fitting which is inside the drum
and tighten by the suitable wrench.
7.2) Rotate manually the drum in order to rewind completely the hose.
7.3) Spring Preload: hold the hose-end and rotate the drum in the opposite direction for a
few laps, refer to the tables p.36-37.
7.4) Insert the hose-end between the guide rollers and put the hose rubber stopper at the
desired length.
Mount the lateral protection joint using the supplied screws and tighten the swivel joint
to the hub.
7.5) Unwind the hose and rewind it completely, to check if the hose reel works properly.
Serial Number Weight
Eccentric
(E)
Swivel Joint
7.2
We affix the CE marking as the manufactu-
rer of this equipment.
On the equipment is securely attached a
tag with curing adhesive system on which
are indicated in addition to the name of the
manufacturer and the symbol "CE", all in-
formation necessary for good identification
of the machine (model, duty, year of con-
struction, weight, etc.).
For all models without hose the shaft on the
drum must be mounted before proceeding
with the connection of the distribution hose,
see instructions on pages 34-35.
The hub can be mounted in two different
positions:
• Centered (C), for 3/8" - 1/2" - 3/4" hoses;
• Eccentric (E), for 1" hoses;
for more details see table on pages 36-37
where the best position for each model is
recommended.
PRE-
LOAD
7.3
- 10 -
WARNING!
DO NOT PUT
HANDS OR ANY
OTHER THING
INSIDE THE
DRUM!