Technoline WS 9136-IT Bedienungsanleitung Seite 27

HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The Weather Station uses 2 x AA, IEC LR6, 1.5V batteries. When
batteries need to be replaced, the low
battery icon will appear on the LCD. To
install and replace the batteries,
please follow the steps below:
1.
2.
3.
HOW TO INSTALL AND REPLACE BATTERIES IN THE
TEMPERATURE TRANSMITTER
The Temperature Transmitter uses 2 x AAA, IEC LR3, 1.5V battery. To
install and replace the batteries, please follow the steps below:
1. Remove the battery compartment cover at
the back of the transmitter.
2. Insert the batteries, observing the correct polarity
(see marking).
3. Replace the battery compartment cover on
the unit.
Note:
In the event of changing batteries in any of the units, all units need to
be reset by following the setting up procedures. This is because a
security code is assigned by the transmitter at start-up and this code
must be received and stored by the Weather station in the first 3
minutes of power being supplied to it.
Lift up the battery compartment
cover.
Insert batteries observing the
correct polarity (see marking).
Replace compartment cover.
26