Technical Data - Bosch Truvo Betriebsanleitung

18 | English

Technical data

Digital detector
Article number
Max. detection depth
– Ferrous metals
– Non-ferrous metals (copper pipe)
– Single-phase live cables (110−240 V, 50−60 Hz,
with voltage applied)
Calibration
Operating temperature
Storage temperature
Operating frequency range
Max. magnetic field strength (at 10 m)
Max. altitude
Relative air humidity
Pollution degree according to IEC 61010-1
Batteries
Approx. operating time
Weight according to EPTA-Procedure 01:2014
A) Depends on material and size of the objects, as well as material and condition of
the substrate
B) Lower detection depth with non-live wires
C) Only non-conductive deposits occur, whereby occasional temporary conductivity
caused by condensation is expected.
The serial number (7) on the type plate is used to clearly identify your measuring tool.
The accuracy and detection depth of the measuring result may be
u
negatively affected if the condition of the substrate is unfavorable.
1 609 92A 6H5 | (30.06.2021)
A)
B)
Truvo
3 603 F68 2..
70 mm
60 mm
50 mm
Automatic
0 °C to +40 °C
–20 °C to +70 °C
50 ± 2 kHz
42 dBµA/m
2000 m
30−80 %
C)
2
3 × 1.5 V LR3 (AAA)
5 h
0.15 kg
Bosch Power Tools