Read / Modify Watering Programmes; Reset - Parkside HG04678 Bedienungs- Und Sicherheitshinweise

Example:
The valve is opened at 9:00 am manually, the opening
period is 30 minutes. A program with a start time be-
tween 9:00 am and 9:30 am will not be undertaken
in this case.

Read / modify watering programmes

1. In the normal operation mode use the rotary control
switch between Programme 1‒6 to read the data.
2. To modify the program data, press the SET button
approx. 2 seconds after selecting the program in step 1.
After modifying the program data, the system will go back
to the normal operation mode.
3. To activate / deactivate the program, press the SET button
once after selecting the program in step 1.
Set the rotary control
(deactivate). Afterwards, press the SET button
4. When the watering timer is active, the
the display.

Reset

Press the SET button
for approx. 3 seconds. The LCD display will show all symbols
28 GB
to "ON" (activate) or "OFF"
5
and button
4
again.
4
symbol flashes in
at the same time
6
to
5
for
4
4