Operation - Parkside HG04678 Bedienungs- Und Sicherheitshinweise

Insert the filter
Figure A.
For a 26.5 mm thread (G ¾ ): Screw the adapter
the tap. Do not use any tools for this purpose.
Screw the union nut
adapter. Do not use any tools for this purpose.
Screw the adapter
then connect a hose to the adapter
Open the tap.
ATTENTION! If defects / leaks arise when using the
adapter
10
sealing tape.
Programme irrigation as described in the chapter "Operation".

Operation

Irrigation can be fully automated at any time of the day using the
irrigation controller. A sprinkler, sprinkler system or drip irrigation
system may be connected.
The irrigation controller automatically carries out irrigation at
the respective programmed start time and for the programmed
duration. Take the season and time of the day into consideration
22 GB
into the union nut
9
onto the thread of the tap or the
1
onto the hose connection. You can
11
, the thread of the tap must be wrapped using
as depicted in
1
10
.
11
onto