Initial Use - Parkside HG04678 Bedienungs- Und Sicherheitshinweise

Initial use

The site where the product will be installed must meet the following
requirements for safe and trouble-free operation:
The maximum temperature of the flowing water is 40 °C.
The minimum operating temperature is +5 °C.
The maximum temperature of the environment is +50 °C.
Only use clear freshwater.
Only connect the product vertically with the adapter
pointed downwards to prevent water from entering the
battery compartment
ATTENTION! The irrigation controller may only be
connected to a drinking water abstraction point with a
safety device which corresponds to TYPE HD at the very
least according to EN 1717 (backflow preventer with tube
ventilation).
Note: Such mains adapters are available from speciality
retailers.
Check the water connection type available. The product is
fitted with a union nut
(G 1 ). For a tap with a 26.5 mm thread (G ¾ ) use the
adapter supplied
.
8
for a tap with a 33.3 mm thread
1
.
10
11
GB 21