The manufacturer INTERPUMP GROUP S.p.A. – Via E. Fermi, 25 – 42049 S. ILARIO D'ENZA (RE) – Italy
DECLARES under sole responsibility that the product identified and described as follows:
Name:
Pump
Type:
Reciprocating plunger pump for high pressure water
Trademark:
INTERPUMP GROUP
Series:
Model:
W150 W130 W130HH W170 W112 W140 W140HH W97 W124 W154 W154HH W950
W951 W952 W953 W954 W955 W956 W957 W958 W959 W200 W204 W14200
W16180 WW186 WW206 WW116 WW156 WW209 WW189 WW136 WW176 WW960
WW961 WW962 WW966 WW967 W:968
complies with Machinery Directive 2006/42/EC.
Standards applied: UNI EN ISO 12100:2010 - UNI EN 809:2009
The pump identified above meets all the essential safety and health protection requirements as listed in
section 1 of Annex I of the Machinery Directive:
1.1.1 - 1.1.2 – 1.1.3 – 1.1.5 – 1.1.6 - 1.3.1 – 1.3.2 – 1.3.3 – 1.3.4 – 1.5.4 – 1.6.1 – 1.7.1 – 1.7.2 – 1.7.4 – 1.7.4.1 –
1.7.4.2
and the relevant technical documentation has been compiled in accordance with Annex VII B.
In addition, the manufacturer undertakes to make available, following a reasoned request, a copy of the
relevant technical pump documentation in the manner and terms to be defined.
The pump should not be put into service until the plant to which the pump is to be incorporated has been
declared in accordance with the provisions of the relevant directives and/or standards.
Person authorised to compile the technical file
Person authorized to draw up the declaration:
Reggio Emilia 04/2021
DECLARATION OF INCORPORATION
(In accordance with Annex II of European Directive 2006/42/CE)
Name: 5REHUWR 0HQR]]L
Address: INTERPUMP GROUP S.p.A. – Via E. Fermi,
25 – 42049 S. ILARIO D'ENZA (RE) – Italy
Name : Mr. Silvio Corrias
Signature:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
e:
24