Before Operation; Setting The Clock; Kitchen Timer Function - Sharp R-860 Bedienungsanleitung

Plug in the oven. The oven display will display: "1:00" and "
once.
This model has a clock function and the oven uses less than 1.0W in stand by mode.
To set the clock, see below.
Your oven has a digital clock feature, you can choose to set the clock time in 24 or 12 hour
cycle in stand by mode.
1. Press the
illuminate.
2. Press the
3. After choosing the hour cycle, press number keys '' 10Min'' , ''1Min'' , ''10Sec'' to input the
clock time .
4. Press the
display and the clock indicator "
NOTES:
• In the process of clock setting, if the STOP/CLEAR key is pressed, the oven will go back to
the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will in-
termittently show "1:00" after the power is reinstated. If this occurs during cooking, the
programme will be erased.
You can use the kitchen timer function, in instances where microwave cooking is not in-
volved for example to time boiled eggs cooked on conventional hob or to monitor the
standing time for cooked/defrosted food.
Example:
To set the timer for 5 minutes.
1. P ress
key once,
the icon '':'' will
flash and the clock
indicator "
illuminate.
When the timer arrives at 0:00, an audible signal will sound once, and the LCD will display
the time of day.
You can enter any time up to 99 minutes 50 seconds. In kitchen timer sta te, the kitchen time
will be diaplayed for 5 seconds.
To cancel the kitchen timer function , You can press STOP/CLEAR key within 5 seconds.
User_manual_R860_WEST.indb 16
key once for 3 seconds, " Hr 24" will display and the clock indicator "
key twice, ''Hr 12" will display and the clock indicator "
key once to start the clock. The icon '':'' of thedigital time will flash on the
" will disappear.

KITCHEN TIMER FUNCTION

2. Press number
keys ''10Min'' ,
''1Min'' , ''10Sec''
to input time .
" will

BEFORE OPERATION

" , an audible signal will sound

SETTING THE CLOCK

3. Press the START/
QUICK START
key to start the
timer.
GB-16
" will
" will illuminate.
4. Check the display.
(The display
will count down
through the pro-
grammed time
and the indicator
will flash)
2020-02-28 11:56:46