Bergeon 6950-050 Gebrauchsanweisung Seite 31

Bergeon SA Tél. +41 32 933 60 00
2400 Le Locle / Suisse Fax +41 32 933 60 01
Auto Memory / Reset setting
at 0.5 sec.
www.bergeon.ch
info@bergeon.ch
Automatic recording of measured value
Set temporal parameters for the recording of the required measured values
with the + or – keys. (Eg for 0.5 seconds = 0.5)
To validate the selected unit press the MEM key.
To exit the menu press the C key.
To navigate the menu without making any changes press the MD key.
Transmission flow rate
Baud-Rate
Change the transmission rate with the + or – keys.
(2400 ↔ 480 ↔ 9600 ↔ 19200 ↔ 2400)
To validate the selected unit press the MEM key.
To exit the menu press the C key.
To navigate the menu without making any changes press the MD key.
Activate or turn off the ringtone
Enable (ON) or turn of (OFF) the ring tone with the + or – buttons
To validate the selected unit press the MEM key.
To exit the menu press the C key.
To navigate the menu without making any changes press the MD key.
Indicator of battery power level
The LCD screen shows the battery level in 4 steps:
1. Charged battery
2. Half-charged battery
3. Battery change required
4. Charging the battery sufficiently for correct operation.
The display "--" indicates that the battery must be changed.
1 minute after this warning the battery no longer supplies the electronics box.