Bergeon 6950-050 Gebrauchsanweisung Seite 26

Bergeon SA
2400 Le Locle / Suisse
Mandrel support
Stand consisting of an attachment for the three-jaw mandrel and an ATGE adapter nozzle.
Directly linked to the sensitivity spindle.
Three-jaw mandrel
Mechanical clamping device for part to be tested. This standard basic mandrel is provided
with all the machines.
Kit for controlling torque screwdriver
ATGE nozzle adapter
Directly screwed onto the mandrel support, allowing for the introduction of the slotted
insert.
Slotted insert
Placed on the nozzle adaptor, its half-moon groove allows it to engage around the
obtruding pin.
It is important to set this groove correctly; an incorrect setting would damage the nozzle
adaptor.
It is reversible with two compatible slit widths for screwdriver drills bits from Ø 0.5 to
Ø 3 mm.
Screwdriver Guide
Screwed onto the nut for the nozzle adaptor, allowing the screwdriver to be inserted
vertically. Three sizes are available and included with the kit.
Tél. +41 32 933 60 00 www.bergeon.ch
Fax +41 32 933 60 01 info@bergeon.ch