Electrical Connection And Safety - Franke SMART FHR 604 C T BK Installations- Und Gebrauchsanweisung

EN
Proper use
The hob was developed
Z Z
exclusively for
non-professional, domestic
use in the household only.
The appliance is not
Z Z
designed to be operated
by an external timer or
a separate remote control
system.
WARNING: The appliance is
intended for cooking only.
It must not be used for other
purposes like room heating.
WARNING: Use only hob
guards designed by the
manufacturer of the cooking
appliance or indicated by the
manufacturer of the appliance
in the instructions for use
as suitable or hob guards
incorporated in the appliance.
The use of inappropriate guards
can cause accidents.
FHR 604 C T BK / FHR 604 C T XS / FHR 604 C T WH

Electrical connection and safety

Z Z
Setting conditions of this appliance is
indicated in tag or data plate.
Z Z
Your appliance should be plugged in a fuse
appropriate for electric power. If necessary,
it is recommended that installation is done
by authorized service.
Z Z
Your appliance is configured in accordance
with electrical supply of 220-240V
AC/380-415V3N AC 50/60Hz.
Z Z
If main electrical network is different
from these values, contact with your
authorized service.
Z Z
Electrical connections of your appliance
should only be made to the fuses having
suitably wired grounding (grounded)
system. If no convenient fuse is available
in the place where your appliance is to be
installed, contact with authorized service
immediately. Manufacturing firm is not
responsible definitely for the damages that
fuses whose grounding is not made and
connected to the appliance can cause.
Z Z
Plug of the appliance should be close to
be accessed easily to the fuse whose
grounding is made without use of
extension cord.
Z Z
Do not allow contacting the power cable of
your appliance with hot regions. Similarly,
keep away it from sharp edges and corners.
Z Z
If feeder cord is damaged, this cord should be
replaced either by manufacturer or its service
agency or same degree qualified personnel in
order to hinder a dangerous situation.
Z Z
Wrong electrical connection may give
damage to the appliance.In this case, your
appliance will remain out of guarantee scope.
Electrical connection of your appliance
should be done by authorized service.
Z Z
During operation of cooktop, some parts
may be hot. When you also bring switches
closed position, it may remain hot for a while.
Children should be kept away every time and
not be left without observation.
Do not touch surface of cooktop while
warning lights flashes. When you bring your
appliance closed position, hot parts being
still dangerous are stated with warning lights.
– 6 –