Omnitronic DJP-900NET Bedienungsanleitung Seite 48

FM setup
Local radio
Playback setup
Resume play options Here you can specify whether the device selects the last operating mode used
Dimmer
EQ (Equalizer)
Buffer time
Information
Software update
Reset to default
FM area
▪ Select your region to define the search range for the tuner.
FM full scan
▪ To conduct a station search in the FM area. All stored FM stations will be
deleted.
FM station list
▪ Display of the FM stations found.
▪ Stations can be moved or deleted. Simply select the desired channel and
press ►. A pop up menu will give you the options Move up, Move down and
Delete.
The device is set by default to scan for radio stations in your local area
automatically when connected to the Internet. You can call these local stations
with the LOCAL button. Use the option Manual-set to select a different region.
Select from the following modes for media centre playback: Repeat All, Repeat
Once, Shuffle or Normal.
when it is switched on or displays the main menu.
The behavior of the display and the display brightness can be set here. This
menu item can also be selected directly using the DIMMER button.
▪ The mode determines whether the display is dimmed after some time of non-
use or not.
▪ The brightness setting (level) determines the display brightness for dimmed
and non-dimmed status.
▪ When the device is in standby mode, you can adjust the display brightness
with the rotary knob.
Various sound presets can be set here.
directly using the EQ button.
Buffer time setting for internet radio playback.
▪ When listening to Internet radio stations, the data is cached in order to avoid
interruptions in the data connection in the event of a poor data connection or
short interruptions. If your Internet reception is poor, increasing the buffer time
can contribute to uninterrupted playback.
View the network and system information of your device
can also be selected directly using the INFO button.
▪ If you use your computer to manage your favourites list, you need the IP
address. You will find the IP address under Configuration > Information >
Network information > IP.
Here you can check for software updates and install them if necessary to keep
your device up to date.
You can reset the Internet radio to factory settings here. Caution! All station
presets and network information will be deleted.
This menu item can also be selected
48 • EN
here. This menu item