Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Oscillation function:
- The oscillation function makes it
possible to direct the flow from the
apparatus so that it automatically
alternates over a range of 75º
- To activate this function, press the
(H) button
- To deactivate this function, follow
the procedure for switching it on in
reverse.
Once you have finished using the
appliance:
- Stop the appliance, selecting
position 0 on the selector control.
- Unplug the appliance from the
mains.
- Clean the appliance.
Carry handle/s:
- This appliance has a handle on the
back to make it easy and convenient
to transport (Fig. 3).
Cleaning
- Disconnect the appliance from the
mains and allow it to cool before
undertaking any cleaning task.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as
bleach, or abrasive products, for
cleaning the appliance.
- Never submerge the appliance in
water or any other liquid or place it
under running water
Anomalies and repair
- Take the appliance to an authorised
technical support service if product is
damaged or other problems arise. Do
not attempt to disassemble or repair
the appliance yourself as this may be
dangerous.
- If the connection to the mains has
been damaged, it must be replaced
and you should proceed as you would
in the case of damage.
For EU product versions and/or in
case that it is requested in your
country:
- This symbol means
that in case you wish to
dispose of the product
once its working life
has ended, take it to an
authorised waste agent for
the selective collection
of Waste from Electric
and Electronic Equipment
(WEEE).
This appliance complies with
Directive 2006/95/EC on Low Voltage
and Directive 2004/108/EC on
Electromagnetic Compatibility.
Werbung
