Taurus Ponent 16 Gebrauchsanweisung Seite 11

in use.
- Use the appliance handle/s, to
catch it or move it.
- If you use the appliance in a
bathroom or similar place, unplug
the appliance from the mains when
it is not in use, even if it is only for
a short while, as proximity to water
involves a risk, even if the appliance
is disconnected.
- Disconnect the appliance from the
mains when not in use and before
undertaking any cleaning task.
- This appliance is for household use
only, not professional, industrial use.
- This appliance is not a toy. Children
should be supervised to ensure that
they do not play with the appliance.
- This appliance is intended for adult
use. Ensure that this product is not
used by the disabled, children or
people unused to its handling.
- This appliance should be stored
out of reach of children and/or the
disabled.
- Do not use the appliance to dry pets
or animals.
- Any misuse or failure to follow
the instructions for use renders the
guarantee and the manufacturer's
liability null and void.
Installation
- The plug must be easily accessible
so it can be disconnected in an
emergency.
- The appliance should be used with
its base fitted.
Assembling the base:
- Fit the base with the column, and
secure it with the screws provided (fig
1). (Only models with column)
- To fix the base into the appliance,
place the appliance face down.
- Fit the base on the main body of the
appliance.
- Fix the base using the nut provided
(fig 2).
- Stand the appliance up again so as
to check that the base works properly.
Assembling the grill and the
propeller:
- Fit the rear grill (E) on the motor
housing (G), Matching their fitting
points.
- Tight the grill nut (D) that attaches
the grill , Make sure of a correct
setting.
- Fit the propeller (C) On the motor
shaft (F).
- Tight the nut (B) that attaches the
propeller, Make sure of a correct
setting.
- Fit the front grill (A) front the rear
grill (E), Matching the security screw
position. Fix the front grill by using
the hooks and tight the security screw
(K) by using a screwdriver.
- Check the correct rotation of the
propeller
Instructions for use
Use:
- Unroll the cable completely before
plugging it in.
- Attach the appliance to its base
making sure that it is correctly fitted
into place.
- Connect the appliance to the mains.
- Guide the appliance to direct the
flow of air in the desired direction.
- Turn the appliance on, by using one
of the speed selection buttons.