Herunterladen Diese Seite drucken

GABAG BASIC Montageanleitung Seite 18

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

INSTALLATION INSTRUCTIONS FOR HORIZONTAL SEALING STRIP (ACCESSORY)
11a
Thoroughly clean the tub/tray edge with the enclosed cleaning cloth and then wipe down with a
dry cloth. Apply the butyl strip once the tub/tray is installed (illustrations 1 – 8). Remove the
covering film.
12a
Apply a butyl strip to both sides if two hori-
zontal seals are required. They must be applied
with an overlap at the corner of the tub/tray.
Remove the covering film.
14
Apply the fleece-laminated butyl strip. Apply
the second composite seal over the sealing
strip. (Same procedure for one-sided assembly)
PRODUCT ORDERING INFORMATION
GABAG Basic tub / tray
sealing strip
2.1 linear metres
8600.021
3.5 linear metres
8600.035
10.5 linear metres
8600.105
21.0 linear metres
8600.210
SUBJEC T TO TECHNICAL CHANGES. PATENT APPLIED FOR.
18
12b
Apply the horizontal seal underneath the tub/
tray edge. Pull the covering film away at the
overlap and glue the horizontal sealing strips
together.
(X
= 6 cm)
IMPORTANT: Be sure to check the installation situation before mounting
the system. Can the requirements of all standards (e.g. for soundproofing
or seals) be met? Do the connections fit? If you have any questions or are
uncertain about anything, please contact the customer advisor in your
region. For details, see: www.wannen-dicht-band.com.
Accessory: Basic horizontal
sealing strip
2.1 linear metres
8601.021
3.5 linear metres
8601.035
10.5 linear metres
8601.105
11b
Apply the horizontal seal underneath the tub/
tray edge.
Continue to illustration 13
13
Install the tub or tray. Apply the first com-
posite seal and glue the horizontal sealing
strip onto the dry composite seal.
(Same procedure for one-sided assembly)
Accessory: Corner compensation
profiles
Set of 4 – 2 × small and 2 × large
8002.004

Werbung

loading

Verwandte Produkte für GABAG BASIC