Manufacturer's Warranty; Spare Parts Lists - REMS Serie Collum RG Betriebsanleitung

g
5. Faults
See also instruction manual of the respective drive unit REMS Amigo, REMS Amigo 2, REMS Amigo 2 Compact, REMS Tornado, REMS Magnum.
5.1. Fault: Wrong groove dimensions (width or dep h)
Wrong grooving rollers inserted.
Grooving rollers worn.
Wrong groove depth selected on the setting disc.
5.2. Fault: Machine does not start.
Emergency stop button (5) of the foot switch (4) not unlocked.
Circuit breaker (6) of the foot switch has tripped.
Worn carbon brushes, only drive units with universal motor.
Mains lead defective.
Machine defective.
5.3. Fault: No feed of the grooving roller.
Pressure limiting valve (16) not closed.
Too little hydraulic oil in the system.
Groove roller device defective.
5.4. Fault: Pipe not picked up.
Grooving rollers worn.
Quick-action hammer chuck (1) of the drive unit not closed (REMS
Magnum).
Too little hydraulic oil in the system.
5.5. Fault: Pipe runs off the grooving rollers.
Pipe not aligned axis-parallel to the machine.
Grooving rollers worn or defective.
The REMS roller groove device may not be thrown in the domestic waste after
use. It must be disposed of properly by law.

7. Manufacturer's Warranty

The warranty period shall be 12 months from delivery of he new product to the
original purchase documents, which must include the date of purchase and the
designation of the product. All functional defects occurring within the warranty
period, which are clearly the consequence of defects in production or materials,
will be remedied free of charge. The remedy of defects shall not extend or
renew the warranty period for the product. Damage attributable to natural wear
and tear, incorrect treatment or misuse, failure to observe the operational
instructions, unsuitable operating materials, excessive demand, use for unau-
thorized purposes, interventions by the customer or a third party or other
reasons, for which REMS is not responsible, shall be excluded from the warranty
Services under he warranty may only be provided by customer service stations
authorized for this purpose by REMS. Complaints will only be accepted if the
product is returned to a customer service station authorized by REMS without
prior interference in an unassembled condition. Replaced products and parts
shall become he property of REMS.
The user shall be responsible for the cost of shipping and returning the product.
The legal rights of the user, in particular the right to make claims against the
seller under the warranty terms, shall not be affected. This manufacturer's
warranty only applies for new products which are purchased in the European
Union, in Norway or in Switzerland.
This warranty is subject to German law with the exclusion of the United Nations
Convention on Contracts for the International Sales of Goods (CISG).

8. Spare parts lists

For spare parts lists, see www.rems.de
See labelling of the grooving rollers, change grooving rollers, see 3.1.
Change grooving rollers.
Check stop for groove depth (17), reset, see 3.2.
Unlock emergency stop button.
Press circuit breaker.
REMS customer service workshop.
customer service workshop.
Have the machine checked/repaired by an authorised REMS customer service
workshop.
Close pressure limiting valve.
device checked/repaired by an authorised REMS customer service workshop.
Have the groove roller device checked/repaired by an authorised REMS
customer service workshop.
Change grooving rollers.
Close quick-action hammer chuck of the drive unit, see 2.2. – 2.4.
device checked/repaired by an authorised REMS customer service workshop.
Align pipe axis-parallel to he machine and support with height-adjustable
material rest REMS Herkules 3B (accessory, Art. No. 120120).
Change grooving rollers.
g