TensCare Nailit Benutzerhandbuch Seite 5

Operating Instructions
The device should be applied to each nail you would like to
clean. Nailit can be used with both hands and feet.
1.
Before using Nailit, be sure to thoroughly clean all nails
which are to be used with the device.
2.
Clamp the Nailit device onto the nail. Ensure the nail
is facing the transparent, round window and therefore
exposed to the blue light.
3.
Press and hold the ON/OFF button for 3 seconds to
switch on the device.
4.
The ON/OFF button will flash green, indicating the
session is underway. The nail is now exposed to the laser
and blue light. The green light will continue to flash for
the duration of the session (7 minutes).
5.
At the end of the session, the green light will stop
flashing and the device will switch off automatically.
4