Service And Customer Care - Kenwood MGX300 Bedienungsanleitungen

To Assemble your
Roto Food Cutter
Assembly
1 Select a drum. The drums are
numbered at the back and
used as follows:
Drum No 1 -
l
For fine shredding :-
chocolate, nuts, carrot and
cheese.
Drum No 2 -
l
For coarse shredding :-
chocolate, nuts, carrot and
cheese.
Drum No 3 -
l
For thin slicing :- onion,
cabbage, cucumber, carrot,
apples and potato.
Drum No 4 -
l
For thick slicing :- onion,
cabbage, cucumber, carrot,
apples, potato, chocolate and
beetroot.
2 Fit the drum into the body of
the roto food cutter.
3 Lock the drum retainer in
position by turning anti-
clockwise until the locating
line is directly underneath the
line on the body
To Use your
Roto Food Cutter
1 Release the locking screw by
turning anticlockwise
slide the attachment into the
outlet .
3
2 Turn it both ways until it
locks into place. Then turn the
locking screw clockwise to
secure.
3 Place a collecting vessel
beneath the outlet.
4 Fill the feed tube to prevent
food from slipping sideways
during processing. Switch on
and gently push down with
the pusher. Note: The pusher
will only fit one way.
When slicing cabbage, cut
l
into wedges and remove the
stalk. Place in the feed tube
and keep upright with steady
pressure on the pusher.
.
1
, then
2
Cleaning
Always switch off and
l
unplug before removing the
attachment from the power
unit.
Dismantle the attachment
l
fully before cleaning.
For easier cleaning always
l
wash the parts immediately
after use.
Wash all parts in hot soapy
l
water, then dry.
Service and
Customer Care
UK only
If you need help with:
using your attachment
l
servicing or repairs (in or out
l
of guarantee)
call Kenwood customer
Z
care on 0345 222 0458.
Have your model number
(MGX300) and date code
(e.g. 21B08) ready. They
are on the attachment outer
carton.
spares and attachments
l
call 0844 557 3653.
Z
other countries
If you experience any
l
problems with the operation
of your attachment, before
requesting assistance visit
www.kenwoodworld.com.
Please note that your product
l
is covered by a warranty,
which complies with all
legal provisions concerning
any existing warranty and
consumer rights in the
country where the product
was purchased.
If your Kenwood product
l
malfunctions or you find
any defects, please send it
or bring it to an authorised
KENWOOD Service Centre.
To find up to date details
of your nearest authorised
KENWOOD Service centre
visit www.kenwoodworld.com
or the website specific to
your Country.
Designed and engineered by
l
Kenwood in the UK.
Made in China.
l
3