Service And Customer Care - Kenwood AT262 Handbuch

to use your liquidiser
1 Ensure the sealing ring is correctly
fitted on the blade unit.
2 Hold the underside of the blade unit
and insert the blades into the base
of the liquidiser. Twist to lock the
assembly firmly in place.
3 Put your ingredients into the jug.
4 Fit the lid to the jug and twist
clockwise into place, making sure
that the tab on the lid slots into the
groove in the handle. When correctly
fitted the markings should align
●
The liquidiser will not operate
if the lid is not correctly
fitted.
5 Place the filler cap into the lid.
6 Remove the high speed outlet cover
by turning anti clockwise and lifting
off .
7 Place the liquidiser over the outlet,
handle towards the back and turn
clockwise to lock firmly into place
●
The liquidiser will not operate
if incorrectly fitted to the
mixer.
8 Switch to maximum speed.
9 Once the desired consistency has
been achieved, switch off and
unplug.
10 Remove the liquidiser.
hints
●
To prevent leaks make sure the base
is locked firmly into the jug.
●
When making mayonnaise, put all
the ingredients, except the oil, into
the liquidiser. Then, with the machine
running, remove the filler cap and
add the oil slowly and evenly.
●
Thick mixtures, eg pâté, dips: use
low to medium speed, scraping
down when necessary. If it's difficult
to process, add more liquid.
Alternatively use the pulse setting to
get the ingredients moving over the
blades.
cleaning
●
Always dismantle before cleaning.
●
Empty the jug before unlocking
the base.
blade unit
1 Remove and wash the sealing ring.
2 Brush the blades clean under the
tap. Keep the underneath of the unit
dry.
3 Leave to dry.
other parts
Wash by hand in hot, soapy water.
.
Alternatively the filler cap and lid, can
be washed in your dishwasher.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
.
UK
If you need help with:
●
using your machine
●
servicing or repairs
call Kenwood Customer Care on
023 9239 2333. Have your
model number ready - it is
located on the underside of your
machine.
●
spares and attachments
call 0870 2413653.
other countries
●
Contact the shop where you bought
your macine.
3