Canon Multi-PDL M3 Installationsverfahren Seite 4

[1]
F-1-5
5) Turn the main unit [1] ON.
[1]
F-1-6
6) When 'Select Language' has appeared, select the
appropriate language.
7) When 'Select Market Region' has appeared, select
the appropriate region.
8) See that the setup menu starts automatically. At
least, select the following in sequence to store data:
'Server Setup', 'Network Setup', 'Printer Setup'. For
instance, when you select settings for 'Server Setup',
the screen will appear at the end
asking you whether you want to store the changes.
Selecting 'Yes' will store the settings in question.
9) Select 'Exit Setup' from the 'Setup' menu. (The
machine will re-start automatically.)
10) If you set up the DNS setup in Network Setup,
turn Off and On a copier after main unit indicates
"Idle".
11) Generate a PS Test page and a Configuration page
as follows, and check to see that the output is normal.
4
Function>Print Pages>PS Test Page/Configuration.
12) Generate a PCL Test page and a Configuration
page as follows, and check to see that the output is
normal.
Function>Print Pages>PCL Test Page/Configuration.