Product Overview; Symbols On The Product - Husqvarna PP 492 Bedienungsanweisung

Product overview

1. Power pack unit
2. Residual-current device
3. Electrical socket
4. Water connector inlet
5. Handle
6. Power indicator
7. Machine stop button
8. CAN bus connector
9. Automatic fuse, 16A (only on 5-pin products)
10. 1 phase socket (only 5-pin products)
11. PRIME connector
12. Wall saw connector
13. Water connector outlet
14. Operator's manual

Symbols on the product

WARNING: Not careful or incorrect use
can result in injury or death to the operator
or others.
967 - 002 - 11.06.2021
5
6
7
13
8
9
10
11
12
Read the manual carefully and make sure
that you understand the instructions
before you use the product.
Always put on hearing protection, eye
protection and breathing protection.
Inspection and/or maintenance must be
done with the motor stopped and the
power plug disconnected.
Energized parts.
This product is in compliance with
applicable EC directives.
The product agrees with the applicable
Australia and New Zealand
electromagnetic compatibility directives.
1
2
3
4
14
3