Air Filter - Zipper ZI-BM870ECO Bedienungsanleitung

See the specification in reference to the spark
plug type.
1. Remove the cap5 (Fig. E1) and unscrew the
spark plug with the relative spanner.
2. Examine the spark plug and remove any
carbon residue with a metal brush. Replace
the spark plug if the electrode is excessively
worn or the insulation is damaged.
3. Measure the distance between the elec-
trodes: it should be between 0.7 and 0.8 mm
or ~ credit card thickness. (Fig. E1).
4. Screw the spark plug back in by hand.
5. Secure a used spark plug with around VA
turn of the spanner, and a new one with
around V2 turn of the spanner.

Air filter

Clean it every 3 months or after every 30
hours of use, and replace it if necessary.
1. Unscrew the filter box knobs
2. Remove the cover.
3. Remove the filter.
4. Knock it gently on a flat surface.
5. Replace the filter in its housing.
6. Replace the box cover and screw on
the knobs.
Fuel tubes
Make sure that there are no cracks in the
fuel pipe and that the joints are solid on a
daily basis.Check that there are no fuel
leaks. Replace where necessary.
Cutter bar
Clean the cutter bar after every use, particularly
the guidance and sliding surfaces. This means
dismounting the cutter. Afterwards, oil all moving
parts. Use only biodegradable lubricants!
Drive gears
After the first year, you should check the oil level
in the drive gear regularly
• Make sure the mower is horizontal.
• Unscrew the oil plug.
• Oil level: up to lower edge of filling opening
Top up with gear oil (SAE 80, capacity 0.25 li-
tres), if necessary.
Further checks
inspection is required for the following:
• if the mower strikes an object
• if the engine stops suddenly
• if the cutter bar is bent
• if the gears are damaged
• if the V belt is defective
Storage
If you store the machine for more than 30 days:
Wait until the machine parts are not hot anymore
Cover the machine with a suitable cloth and store
it on a dry place
Disposal
Do not dispose your ZI-BM870ECO in the residual
waste! Contact your
information about
possibilities in your area. Drain fuel from the fuel
tank and oil form the oil tank completely before
disposing the machine.
machine into its components before disposing
them.
Spare part order
With original ZIPPER spare parts you use parts
that are attuned to each other and shorten the
installation time and elongate your machines li-
fespan.
N O T I C E
The installation of non-original parts renders
warranty null and void.
Exempted is the replacement of the spark plug
if carried out by a specialist.
You find the order address in the preface of this
operation manual.
Guarantee
Warranty claims based on your sales contract
with your HOLZMANN retailer, including your sta-
tutory rights, shall not be affected by this guar-
antee declaration.
Zipper Maschinen grants 1 year of spare part
guarantee, reduced to 6 months for tools in
commercial use, valid from the purchase date on
the sales receipt.
The guarantee covers the replacement of de-
fect/deficient machine parts/components whose
defect/deficiancy can be verified adequately that
local authorities
best available disposal
Disaggregate
for
the
20