Operation - PEAKnx Controlmicro Schnellstart

EN Controlmicro Short Guide

Operation

Avoid damage to the panel due to early commissioning!
Note the climatic conditions at the installation site!
■
Before switching on the mounted device, the device must have adapted to the clima-
■
tic conditions at the installation site.
Temperature and humidity differences can cause damage to the unit.
■
Avoid damage to the glass cover and display!
The touch-sensitive surface can easily be damaged! Use only your fingers or a touch-
■
pen to operate the panel. Do not use sharp or pointed objects.
Do not use harsh detergents, scouring agent, acids or organic solvents. Do not use
■
any sharp objects for cleaning.
Do not let any moisture get into the unit. Do not spray cleaning agents directly onto
■
the surface of the touchscreen.
Touch the panel to operate. A brief touch of the panel is interpreted as a mouse click. A right
mouse click is obtained by a prolonged touch (approx. 3 seconds).
Text entries can be made using the Windows on-screen keyboard. This can be found in the task
bar at the bottom right.
Activate keyboard input
To automatically display the keyboard when tapping on a text input field, do the following:
Swipe into the screen from the right and select "All settings".
■
Select "Devices" > "Typing".
■
Under "Touch keyboard", check the last item: "Show the touch keyboard when not in tablet
■
mode and there's no keyboard attached."
To display the keyboard icon in the taskbar:
right-click on the taskbar and select "Show touch keyboard button".
■
18
Caution
Caution