PEAKnx Controlmicro Schnellstart Seite 15

Before installation, make sure that all connecting cables of the device are undama-
■
ged.
Preparation
Tip: Choose the installation height of the panel according to the height of the primary user

so that the top edge of the panel is at his/her eye level. A slightly lower screen prevents fatigue
of the arms during operation.
Note: We recommend fusing the panel separately.


Use a power source of the following specification:
■
− 24 V DC, 2.5 A for the control cabinet, Item number: PNX12-10010
Position Description
A1 Panel with touchscreen
A2 Mounting plate; Suitable switch box for mounting:
standard screw spacing 60 mm, depth min. 35 mm
Warning
EN Controlmicro Short Guide
15