Logging On Duofern End Units (For Item No. 3232 03 64 / 3248 03 66) - RADEMACHER DuoFern Gebrauchsanleitung

Logging on DuoFern end units (for item no. 3232 03 64 / 3248 03 66)

In order to operate a DuoFern end unit with the DuoFern Manual Transmitter Standard, this must be logged on
to the respective DuoFern end unit.
Use a thin object that is not too sharp to press the "Connect" button.
1.
2.
3.
. . .
or
. . .
44
1 x
60 seconds
Switch the desired DuoFern end unit or DuoFern
actuator to log-on mode.
(See the corresponding operating manual)
Switch the DuoFern Manual Transmitter Standard
to log-on mode.
In order to do so, briefly press the "Connect button".
The LEDs on all device or group buttons light up.
◆ A fully allocated group button does not light up.
◆ Log-on mode remains active for 60 seconds.
EN