VGO OL-BKYR20-A010D Bedienungsanleitung Seite 17

4.3 ATTACH THE EXHAUST HOSE
The air conditioner requires being vented outside so that the exhaust air
can escape the room which coming from the appliance contains waste heat
and moisture.
Do not replace or extend exhaust hose which will result in decreased
efficiency, even worse shut down the unit due to low backpressure.
Step 1: Connect the hose connector to one end of the exhaust hose.
Step 2: Connect the windows kit adapter to the other end of the
exhaust hose.
Step 3: Fix the window seal set on the windows,A is sealing and B is
Velcro.Refer to the steps as following:
Step 4:
Remove the back tape and apply the velcro tape to the non-hinged
sides of your window and frame as shown below.Please ensure that the window
can close properly with the velcre tape applied.
17