Bosch Security Systems Plena LBB 1925 Installations- Und Benutzeranweisung Seite 22

PLENA SYSTEM PRE-AMPLIFIER AND CALL STATIONS
zh
1 CH USE 2 CH USE
Q701
CN10
CN23
25-7
3938 101 90282
CL 14155025_023
131101
en Installation of the system pre-amplifier
Setting the Speech filter and call station volume
The Speech filter for the mic/line input can be switched on/off with jumper JP101 (default ON).
You can set the call station volume with VR101.
Setting priority
The priority cannot be set manually. The default priority order is:
1. Emergency/Telephone input
2. Trigger 1 or 2 (first comes, first served)
3. All-call call station LBB 1941
4. 6-zone call station LBB 1946
(DIP switch setting of LBB 1946)
Setting single and dual channel use
The system pre-amplifier can be used with one booster amplifier for both music and calls ('1 channel use'). Any call will
interrupt background music in all zones. It is also possible to use separate booster amplifiers, for music and calls ('2
channel use'). Now a call will not interrupt music in zones, not addressed by the call. Jumper JP102 selects whether
background music is going to the Master output (1 channel use) or not (2 channel use). Jumper J2 must be set to either
1 channel use or 2 channel use to select the amplifier terminals for the zones.
PC AUDIO
MUSIC OUT MASTER OUT
25-1
5. 6-zone call station LBB 1946
(DIP switch setting of LBB 1946)
6. Background music and mic/line input
12
CALL STATIONS
IN SWITCH
VR101
CALL STATION
LEVEL
C179
CN9
CN1
CN107
CN6
CN17
CN8
1 CH USE
LINE
XLR DIN
JP101
OFF ON
CN4
CN14
CN18 CN13
JP102
2 CH USE
CL 14155025_015
121101