Loading A Film Roll - Pregis AirSpeed MINI PAK'R Bedienungsanleitung

STEP 1: Connecting Power
Loading a
•
Insert provided Power Cord
Film Roll
into the rear of the machine.
•
Plug Power Cord into a
dedicated, grounded outlet.
•
Switch machine power ON (I).
3 STEPS
Rear of MINI PAK'R Machine
STEP 2: Loading a Film Roll
•
Push Film Roll onto Film Roll Holder (with
the film feeding off the top of the roll as
shown) until it seats firmly.
Table of Table of
Contents Contents
Serial Label
ON/OFF Switch
Accessory Port
Power Cord
200mm wide film
400mm wide film
MINI PAK'R 제조기 사용자 설명서 -8- 페이지
MINI PAK'R Machine User Manual Page -8-
STEP 3: Threading the Film
Air Channel
•
Pull to unwind 18 inches
(45cm) of film. Open the
Air Channel at the right
side of the Film Roll.
Advance Film Manually
Pull the film
down the
Air Fill Tube
and through
the Sealing
Mechanism.
MINI PAK'R Machine User Manual Page -9-
•
Slip the Air Channel
over the end of the
Air Fill Tube.
Air Fill Tube
OR
Advance Film Automatically
Pull the film down
the Air Fill Tube
until it stops, then
press and hold the
Start Button to
advance the film
automatically.