Inspection Of The Ecobloc Smart - Graf Ecobloc Inspect Smart Anleitung Für Den Betrieb Und Die Wartung

3. Cleaning of the connected areas
3.5

Inspection of the EcoBloc Smart

1. An incorrect installation or damaged parts of the infiltration/attenuation tank can be checked by
inspecting the outer inspection lines of the tank.
2. The highest amount of dirt and debris will settle down inside the shafts of the inlet pipes or next to the
choke drain or outlet shaft. These shafts and tank connections should be inspected and cleaned regularly.
3. The amount of pollution inside an attenuation tank can be checked by inspecting the shortest line
between inlet and outlet shaft. In case of an infiltration tank, the pollution can be checked by inspecting
the inlet pipes and one of the central inspection lines inside the tank.
Ways of inspection inside the infiltration/attenuation tank
15 / 18