Warranty; Noise/Vibration Information - Würth master H 26-MLE Bedienungsanleitung

Maintenance and cleaning
q Unplug from the mains before all work on the
product.
q Always keep product and ventilation slots clean
for safe, proper working.
q Always keep tool holder clean.
Changing dust protection cap
A damaged dust protection cap must be replaced im-
mediately. It is recommended to have the cap changed
by a customer service centre.
Should, despite careful manufacturing procedures and
test procedures, the product fail at some point, have
the product repaired by WÜRTH master service. In
Germany you can contact Würth master service free
of charge on tel. 0800-WMASTER (0800-9 2 8
3). In Austria on tel. 0800-20 30 13.
With all enquires and orders for spare parts it is im-
perative you state the 8-digit article number as per the
type plate on the product.
The current spare parts list for this product is available
in the Internet at "http://www.wuerth.com/partsman-
ager", or request the list from the nearest Würth sub-
sidiary.
Disposal
Electrical tools, accessories and packaging must be
sent for recycling.
Only in EU countries:
Do not throw electrical tools in household waste!
In accordance with European directive 2002/9/EC
on waste electrical and electronic equipment and its
implementation in national law, electrical tools that can
no longer be used must be collected separately and
recycled.
Würth will be pleased to accept the return of your
faulty Würth product at no charge.
All manuals and user guides at all-guides.com
We reserve the right to make changes without notice

Warranty

For this WÜRTH product we provide a warranty as per
legal / national stipulations from the date of purchase
(proof of purchase with invoice or delivery note). Re-
sulting damage will be rectified by replacement or
repair.
Damage due to normal wear, overload or improper
handling is excluded from the warranty.
Complaints can only be accepted if the product is re-
turned, without dismantling, to a WÜRTH subsidiary,
your WÜRTH sales representative or a service centre
for electrical tools authorised by WÜRTH.

Noise/vibration information

Measured values determined as per EN 0 45.
The A-weighted noise level of the product is typically:
sound pressure level 91 dB (A); sound power level
102 dB (A).
Wear ear defenders!
Overall vibration figures (vector sum of three direc-
tions) determined as per EN 045:
- Hammer-drilling in concrete: vibration emission
ah=13m/s², uncertainty K=2.0m/s²
- Chiselling: vibration emission ah=11m/s², uncer-
tainty K=2.0m/s²
Declaration of conformity
We declare with sole responsibility that this product
complies with the following standards or standardisa-
tion documents: EN 045 as per the stipulations of
the directives 89/33/EEC, 98/3/EC.
0
Adolf Würth GmbH & Co. KG
15