HQ Power VDPDMXC145 Bedienungsanleitung Seite 7

a) Manual Run
1. Make sure AUTO TRIGGER and MUSIC TRIGGER are off.
2. Select a bank with ▲ or ▼ or through MIDI signals.
3. Press the desired SCENE button.
b) Auto Run
1. Press AUTO/DEL. The AUTO TRIGGER LED comes on.
2. Press TAPSYNC/DISPLAY. Press it again after an interval of your choice. The interval
between the two presses is the assigned speed of AUTO RUN (max. 10 min.). If you press
more than twice, only the last two presses are taken into account.
3. Select a bank with ▲ or ▼ or through MIDI signals.
4. Press AUTO/DEL again to leave the AUTO RUN mode.
c) Music Run
1. Press MUSIC/BANKCOPY. The MUSIC TRIGGER LED is lit.
2. Select a bank with ▲ or ▼ or through MIDI signals.
3. Press MUSIC/BANKCOPY again to leave the MUSIC RUN mode.
d) Midi Run
The scenes from a bank are selected through the MIDI input whenever the device is in the
MANUAL RUN, AUTO RUN or MUSIC RUN mode.
e) Chase Run
To use a chase run you have to make programmes first. A chase run can be activated via the
MANUAL RUN, AUTO RUN, MUSIC RUN and MIDI RUN modes.
Select the desired chase with the CHASE button. The selected chase is displayed on the LCD.
f) Fade Time Control
Adjust the fade time with the slider.
MIDI Channel Settings
The correct bank is selected by means of the NOTE ON signal coming from the MIDI device
e.g. a keyboard.
BANK
BANK 1
VDPDMXC145
All manuals and user guides at all-guides.com
NOTE NUMBER
00
01
02
03
04
05
06
7
FUNCTION
Turn on/off SCENE 1
Turn on/off SCENE 2
Turn on/off SCENE 3
Turn on/off SCENE 4
Turn on/off SCENE 5
Turn on/off SCENE 6
Turn on/off SCENE 7
VELLEMAN