Programming Chases - HQ Power VDPDMXC145 Bedienungsanleitung

b) Scene Editing
1. Select the desired scene of a bank by pressing the corresponding SCENE button.
2. Adjust the faders
3. Press the MIDI/ADD button
4. Press SCENE again to store the new settings
c) Copying a Scanner
1. Hold the button for the currently selected scanner
2. Press the button for the scanner you want to copy the settings of the first scanner to.
3. Release both buttons.
d) Copying a Scene
1. Press the SCENE button for the scene you wish to copy
2. Press the MIDI/ADD button.
3. Select a bank with ▲ or ▼ and press the button for the scene you want to copy the settings
of the first scene to.
e) Deleting a Scene
1. Select the desired scene by pressing the corresponding scene button.
2. Press the button for the scene to be deleted while holding the AUTO/DEL button.
f) Clearing all scenes
1. Press PROGRAM and ▼ while deactivating the device.
2. Turn the device back on.
g) Copying a Bank
1. Select the desired bank.
2. Press the MIDI/ADD button.
3. Select the bank you wish to copy with ▲ or ▼.
4. Press the MUSIC/BANKCOPY button.
h) Deleting a Bank
1. Select the bank to be deleted.
2. Press AUTO/DEL and MUSIC/BANKCOPY buttons simultaneously.

Programming Chases

Hold the PROGRAM button for 2 seconds to activate the programming mode. The programming
LED will start to flash. One chase can contain up to 240 scenes and the scenes are run in the
programmed order. The first scenes to be run will be the first that were programmed.
VDPDMXC145
All manuals and user guides at all-guides.com
5 VELLEMAN