Scope Of Delivery; Important Notes; Target Group; Intended Use - EMH metering EM4TII Gebrauchsanleitung

Scope of delivery

Please check the content of the package, before starting with the instal-
lation and commissioning.
• 1 EM4TII / EM4TII+ device
• 1 Instructions for use
• additional locking bolts for cable gland
(2 x Ø 6,4 x 25 mm and 2 x Ø 9,3 x 20 mm)
If the content is incomplete or damaged, please contact your source
of supply. Store, use and transport the device such, that it is protected
from moisture, dirt and damage.

Important notes

This instruction is part of the documentation. All versions of this device
are described in this instruction. Therefore characteristic features may
be described, which are not valid for your device.
Further informations about this device refer to the product ma-
nual. Pay attention to all component accompanying documents
when operating this device.

Target group

This instruction is intended for technicians who are responsible for
installation, connection and maintenance of the device. The device
has to be installed and put into operation only by qualified electricians
in accordance with the generally accepted rules of technology and if
necessary the regulations, which are relevant for the installation of
telecommunications equipment and end devices.

Intended use

The meter has to be used for measuring electrical energy only and has
to operate within the specified values (refer to nameplate).

Maintenance and warranty instructions

The devices are maintenance-free. In case of damage (e. g. due to
transportation, storage) no repairs may be carried out independently.
Opening of the device invalidates any warranty claim. The same applies
for any defect caused by external influences (e. g. lightning, water, fire,
extreme temperatures and weather conditions) and any inappropriate or
improper use or handling.
Only authorised personnel are allowed to break the sealing!
18