Common Faults - MEDCAPTAIN VS-10S Bedienungsanleitung

Common Faults

7 Common Faults
Fault Symptom
The device
cannot be
powered on.
The image is
not clear.
The
laryngoscope
blade cannot be
installed.
Possible Cause
1. Battery is
empty.
2. Battery is
faulty.
1. The camera is
covered.
2. LED light
source brightness
is too low.
1. The
installation
method is
incorrect.
2. The snap joint
is damaged.
1. Charge the device by using the power
adapter.
2. After the battery is fully charged,
press and hold the power button to
power on the device.
3. If the device still cannot be powered
on, contact the after-sales service
department or the local distributor.
1. Check whether the camera is covered
by foreign matters. If so, use a piece of
non-woven gauze to gently wipe off the
foreign matters.
2. Adjust the LED light source
brightness according to section 6.2.
3. If the image is still not clear, contact
the after-sales service department or the
local distributor.
1. Reinstall the laryngoscope blade
according to section 5.1.
2. Check whether the lock function of
the snap joint is normal.
3. If the lock function is abnormal,
contact the
department or the local distributor.
25/ 46
Solution
after-sales service