Display Screen - MEDCAPTAIN VS-10S Bedienungsanleitung

Product Description
 Snap joint: Used for locking the laryngoscope blade.
 Screen shell: Used to fasten and support the display assembly.
 Three-way spindle: Used to connect the display assembly and handle assembly
and to enable vertical and horizontal rotation of the display.
 Handle cap: Used to hitch the handle.
 Handle: Used to hold the device in hand during clinical application.
 Battery cover: Used to cover the battery to prevent the battery from falling off.
CAUTION:
 All other devices connected to the video laryngoscope must meet the
requirements in applicable standards, such as IEC 60950 and IEC 60601-1. In
addition, the system configuration must meet the requirements in the IEC
60601-1-1 standard. Any personnel who connect devices to the video
laryngoscope's signal input/out port must be responsible for providing
evidence that the devices are certified according to IEC 60601-1-1.

4.4 Display Screen

The main observation interface on the display screen of the device consists of
3 display areas: status area, image display area, and operation area.
13/ 46