Operating Instructions - MEDCAPTAIN VS-10S Bedienungsanleitung

Operating Instructions

5 Operating Instructions
5.1 Installing a Laryngoscope Blade
This device must be used together with a laryngoscope blade to facilitate
smooth intubation.
1. Open 1/3 of the laryngoscope blade's packaging bag. Hold the connector of the
laryngoscope blade, and pull 1/3 of the laryngoscope blade out of the bag.
2. Insert the handle insertion part of the device into the connector of the
laryngoscope blade, and push the laryngoscope blade to the snap joint of the
device to lock the laryngoscope blade. After you hear a clicking sound, the
installation is successful.
WARNING:
 Please wear sterilized gloves before touching the laryngoscope blade. Do not
touch the laryngoscope blade with bare hands.
 The laryngoscope blade adopts sterile packaging. If the sterile package is
damaged, do not use the laryngoscope blade.
 For other precautions related to use of the laryngoscope blade, see the
laryngoscope blade operation manual.
5.2 Powering On the Video Laryngoscope
After fully charging the video laryngoscope and installing the laryngoscope
blade, power on the video laryngoscope according to the following steps:
1. Press the power button.
2. The display screen of the video laryngoscope displays the startup interface.
3. After system initialization, the display screen displays the main observation
interface.
17/ 46