Assembly; Emptying The Dust Container - Clever Clean Fusion MX 12 Gebrauchsanleitung

ASSEMBLY

• Push the battery straight into the motor unit from below until it audibly clicks into place. Make sure
that the battery is not tilted or inserted the wrong way round. Make sure the battery is securely
engaged before connecting any other accessories to the main unit.
• The crevice nozzle or the 2 in 1 upholstery nozzle can be placed directly onto the suction opening.
Make sure that the nozzles are only pushed on hand-tight to avoid damage and injury.
• The electrical floor nozzle must be pushed straight onto the suction opening so that the electrical
connection can be made at the bottom of the nozzle with the main unit. The electric floor nozzle
audibly engages with the main unit.
• As an option, you can also use all nozzles with the extension suction pipe. Place the extension suction
pipe straight on the suction opening so that the electrical connection is established. The extension
suction pipe also audibly engages.
• If the extension suction pipe or the electric floor nozzle are to be separated from the main part, press
the respective unlocking button on the suction pipe or floor nozzle and remove the respective part
from the suction opening. The crevice nozzle and the 2 in 1 upholstery nozzle do not engage and can
therefore be easily removed from the respective suction opening.
• Replace all accessories only when the appliance is switched off!
24 24

EMPTYING THE DUST CONTAINER

• Empty the dust container only when the unit is switched off.
• Press the release button on the top of the dust container to open the dust container flap.
• Empty the dust container directly above an open waste bin. The distance to the bin should be as
small as possible so that the dust is not distributed in the environment.
• Close the flap again until you hear it click into place.
25