Fancom Helpdesk; F-Central Farmmanager; Safety Instructions And Warnings - Fancom WEBLINKBOX Installationsanleitung

1.3

Fancom helpdesk

For any questions and support, please contact the local Fancom Sales & Service
Center.
1.4

F-Central FarmManager™

Virtually all Fancom equipment can be controlled and managed from a central location.
This requires the F-Central FarmManager software package and a communication
module. The screens in the control computers are also used in F-Central
FarmManager. This means you can start working immediately.
2.

Safety instructions and warnings

Read the safety instructions, regulations and conditions carefully before installing
and/or using the system. Installing the device and remedying any malfunctions must
only be carried out by an authorized installer, according to the prevailing regulations.
The guarantee will not apply if this product is built into a switch box in any way other
than that indicated by Fancom.
The network module is a piece of electronic apparatus. There is always a risk of
a malfunction occurring. Fancom has made every effort to ensure that an alarm
is given in the event of an emergency. Unfortunately, a 100% guaranteed
cannot be provided as not all circumstances are under Fancom's control.
Fancom cannot be held liable for any damage caused by incorrect settings
and/or non or partial functioning of the entire installation. Ask your installer if
the alarm outputs of each control computer have been connected to a separate
alarm circuit.
Inspect the network module regularly for any damage. Report any damage to
your installer immediately. A damaged control computer is dangerous!
Do not use running water (high pressure cleaners) to clean your control
computer. The network module is water resistant, but not waterproof! Do not
switch off the network module when houses are unoccupied; otherwise there is
the risk of condensation forming in the network module.
Gndf
g
2